You may need to relocate outlets for a variety of reasons, including remodeling, rewiring, or adding new rooms to your home. However, you should always make sure that all wires run from the source of power to the new location, and that there is no power running through the new outlet. If you find an outlet that has an unusually high voltage, you should first check that it is safely unplugged before you try to relocate it.
Things To Consider Before Relocating An Outlet
- Before relocating an outlet, make sure to note the colors of the wires.
- You can do this by noting down the color of the wires. After that, attach the plug to the new box with two screws. Remember to switch off the circuit breaker before relocating the plug to the new location. Then, make sure that you mark the old outlet so that you can keep it active while you finish the relocation. During this process, you can remove the old receptacle and reinstall it.
- If you want to relocate an outlet, you should first locate its current location.
- You can do this by cutting a hole in the baseboard and covering it with a blank cover. Then you can move the outlet into the baseboard. The wires that feed from the wall to the outlet are much easier to move. The only difficulty is figuring out how to splice the wires from the top of the cabinet. A professional electrician can provide you with tips and tricks on how to relocate outlets.
- If you have to move an outlet, it is best to shut off the power to it at the circuit breaker.
- Use the multimeter to detect the voltage. If you can’t reach the breaker, you can plug a lamp into the outlet and flip the switches one by one. Be careful not to accidentally flip the switch. In some cases, relocating an electrical outlet may cause severe injury or even death. This is why it is always best to hire an electrician for any type of electrical repair.
- If you’re moving to a new location, you’ll want to consider the local electrical codes.
- Many local ordinances require that you install GFCI outlets in areas prone to moisture. You’ll also need to think about the type of appliances that will need a dedicated outlet. If you plan on moving the outlets, make sure that you have a GFCI outlet in the location.You’ll want to have a GFCI outlet in these types of locations.
How To Relocate An Outlet
- First locate its current location.
- Next, trace a line in the drywall where the outlet is.
- Then, remove the screw holding the receptacle in the wall.
- Once the screws are in place, the receptacle can now be screwed into the cut-in box.
- Then, reconnect the wires and screw it into the cut-in box.
- Once the new plug has been installed, you can install a cover plate over it.
Another Way To Relocate An Outlet
- Install them in strategic locations.
- If you’re moving a flat-screen television to the wall, you’ll need to install an outlet behind the television. This will help hide the wires and make the space more attractive. And it’s important to keep in mind that an outlet should not be positioned too close to a window or door. You’ll need to check the electrical code for the area where the outlet should go before you hire a contractor.
- When relocating an outlet, you should disconnect the power at the breaker box. You must test the wires to make sure that they do not have electricity before moving them. Ensure that the wiring is properly connected. You will need basic electrician’s tools such as a voltage tester and a voltage-meter. Once you’ve done that, you can add more outlets in the same location. After relocating the outlet, you should reconnect the wires with the new one.
- Once you’ve located the new location of your outlets, you can move them wherever you want. You can also move them to other locations, such as an upstairs bedroom or a basement. If you’re relocating multiple outlets, you’ll need to relocate them to make them more convenient for your family. You can also relocate outlets to other rooms in your home if you’re moving from a single level to another. You can have more than one outlet in the same room if you relocate your existing ones.