When laying electrical conduit, make sure that it is buried in a deep enough area. You should also remember that it is important to keep the wire inside the pipe from touching the ground. After putting the conduit, be sure to make sure that it is secured to avoid any damage caused by electricity. There are many ways to fix an electrical cable. When the conduit is buried, you should always connect it to the wall. If you can’t do that, you should use a breaker.
Several Factors To Consider Before Laying Electrical Conduit
- Before installing an electrical conduit, you should decide on the type of conduit you’ll use.
- The types of conduits include PVC plastic, aluminum, copper, and galvanized steel. Each of these materials has its advantages. A durable conduit will help the electrical wiring run smoothly. It should also be grounded to prevent an electric fire. If you want to avoid electric shocks and fires, you should purchase metal-free wiring. If you don’t have this, you should use PVC.
- You should avoid using materials made of asbestos.
- Asbestos is a form of mineral fiber and is highly flammable. When heated, it releases its fibers into the air. It is therefore important to avoid it when laying electrical conduit. To avoid this, make sure that the material you use is fire-resistant. In addition, it should be flexible and bendable.
- When laying electrical conduit, you should always follow safety regulations.
- Electricity can be extremely dangerous. Whether it is a cable, wire, or even a plug, the conduit should be as safe as possible. This is why it is important to follow safety guidelines when installing this type of material. You should only install electrical conduit in areas that are insulated and secure. In case the concrete slab is unstable, you should choose a different material.
- You should also be aware that the wiring must have adequate space within the conduit.
- This is necessary to keep it safe from moisture. Remember, the length of electrical conduit should not exceed five inches. You can use a one-inch-conduit for five wires, but you may want to buy a larger-sized one. In addition to choosing the right size, you should also consider the number of joists and studs the conduit will be running in.
Steps When Laying Electrical Conduit
- You should mark the points of light sockets and outlets.
- You should then place the light boxes flush with the decking boards or plates.
- Then, connect the electrical conduit pipes to the loop inside the box.
- If you use PVC glue, you can prevent the conduit from coming out of the box.
- Once this is done, you can proceed to lay the electrical conduit in your concrete slab.
- It is important to note that you must turn off the power source to electrical wires before laying the electrical conduit.
- Once you have marked the location of the socket outlets, you can lay the conduit for the outlet.
- You can also bend the pipes to make them straighter.
- After the wires are installed, you can then attach them with a wire. A pigtail is a good place to store the wires, and fish tape will keep them from falling out.
- The last step is to secure the electrical conduit with a coupling. To do this, you should use a clamp.
Types Of Electrical Conduit
There are two main types of electrical conduit: the metallic type and the flexible one. Both of them have advantages and disadvantages. If you’re installing electrical wiring in an outdoor location, you’ll have to consider the cladding and the insulation materials.